Adx White Craft Glue 30g

• ADX White Craft Glue is a specific type of adhesive typically used for various crafting and DIY projects.
• ADX White Craft Glue is likely a type of white, water-based adhesive that dries clear It
• ADX White Craft Glue is commonly used for gluing paper, cardboard, fabric, wood, and other porous materials in arts and crafts projects, school projects, and DIY activities.
• ADX White Craft Glue is easy to use, dries relatively quickly, and provides a strong bond for many lightweight materials.

HOW TO USE: 

1. Prepare Your Work Area: Ensure you have a clean and dry work surface. Lay down some newspapers or a craft mat to catch any spills or drips.

2. Prep the Materials: Make sure the materials you plan to glue are clean and free from dust or debris. If necessary, trim or cut them to the desired size or shape before gluing.

   Open the Glue Bottle: Unscrew the cap or remove the nozzle from the glue bottle. Some bottles might have a protective seal that needs to be removed before use.
   

3. Apply the Glue: Squeeze a small amount of glue onto one of the surfaces you want to glue. Be careful not to use too much; a little usually goes a long way. If you're gluing paper, apply the glue in a thin, even layer over the entire surface.

   Join the Surfaces: Press the two surfaces you want to glue together firmly. Make sure the glued surfaces align properly. For some materials, it's helpful to apply pressure for a few seconds to ensure a good bond.
   

4. Wipe Off Excess Glue: If there's any excess glue that squeezed out from the edges of the surfaces, use a damp cloth or sponge to gently wipe it away. This will help create a neater finish.
   

5. Allow Time to Dry: Let the glued project sit undisturbed for the recommended drying time. White craft glue usually dries relatively quickly, but the exact drying time can vary depending on factors like humidity and the amount of glue used.
   

6. Clean Up: Close the glue bottle tightly to prevent it from drying out. If any glue got on your hands or the work area, wash it off with soap and water.